Powertek Equipment Company
ISO 9001:2008 Certified
Mulund West, Mumbai, Maharashtra
Send E-mail
Send SMS

Special Purpose Electric Motors

We are manufacturing Electric Motors from 0.09 Kw to 22 Kw (0.125 Hp to 30.0) in three phase in all-polarity (3000-1500-1000-750 RPM) with all types of construction & 30 Watts to 2200 Watts (1/25 HP to 3 HP) in Single Phase. The motors are with class 'B' insulation & can be offered in class 'F' & H also, these motors are rated for 415 Volts 6% three phase 50/60 Hz 3% & 230 Volts 1-% single Phase 50/60 Hz 3% Supply. Technical Specification
  • Wide Voltage fluctuations motors
  • Any voltage & frequency motors
  • Higher ambient Temp. motors
  • Multi Speed motors
  • Low Speed motors like 350-450 RPM
  • Non-standard-mounting motors
  • Double Shaft motors
  • Cooling tower motors
  • Hollow-shaft motors
  • Marine duty motors
  • Torque motors
  • Textile loom motors
  • Brake motors, Heavy-start-stop motors
  • Hoist/Crane duty motors.

Approx. Rs 13,200 / Piece(s)
Get Best Quote

PEC MAKE crane duty motors are specially designed for frequent starts/stops & reversing required in cranes & lifts of all types. They can also be used in applications such as material handling, lifts, cranes, hoists, weirs & sluices, auxiliary motors in rolling mills or wherever intermittent drives are required. Positive locking between rotor and shaft is provided with keyed joint on motors from 132 frame and above. These motors can be provided with brakes fitted on Non Driving End for instantaneous stopping. Brakes are used for various applications where instantaneous stopping of the driven load is required. The operation of the brake is AC˜FAIL SAFE TYPE i.e. normally on. The brake is applied when the motor is switched off or if power failure occurs. In applications where total load stopping time is not very critical, AC side interruption is used and in applications where faster stopping is necessary, DC side interruption is used. Note: The motor must not be switched ON unless the brake is energized and the brake should not be de-energized when the motor is ON. Interlocking of two contactors is absolutely necessary for safety of motor and brake as well.


Yes! I am Interested
Approx. Rs 7,000 / Piece(s)
Get Best Quote
We specialize in manufacturing, supplying and trading a wide range of Electric Brake Motor.These motors are designed and engineered with precision at our technically advanced manufacturing unit, by making use of premium quality metals and alloys. In addition to this, with the help of our wide logistics base, we have become capable of making on-time payment of ordered consignments.


  • Tough construction
  • Accurate dimensions
  • Easy to fit


  • Output Power: 0.55-45 kw
  • Frequency: 50 Hz/60 Hz
  • Voltage: 36 V

Yes! I am Interested
Approx. Rs 8,500 / Piece(s)
Get Best Quote

Brake Motors
We are engaged in the manufacturing and supplying of high quality Brake Motor. These motors are manufactured in accordance with industry laid specifications, using premium quality metal that is sourced from trustworthy vendors. Known for their hassle-free installation, optimum performance and minimum electricity consumption, offered motors are used in lifts, cranes, winch and hoists.


  • Corrosion & Abrasion Resistant
  • Rust-proof
  • Dimensionally Accurate


  • Range: 0.25 HP to 30 HP
  • AC Brake: DAT Series (2 Nm to 200 Nm)
  • DC Brake: SLDC / PEM Series (6 Nm to 380 Nm)

Yes! I am Interested

Download Brochure
Powertek Equipment Company

Ravish P. Hebbar (Marketing Director)
No. 203, Runwal Commercial Complex, L. B. S. Marg Opposite Veena Nagar, Mulund West
Mumbai - 400080
Maharashtra, India
Send Email
© Powertek Equipment Company. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited